|
|
|
| |
You can download a PDF of our catalog by clicking the link below |
|
|
|
|
| |
You can download a PDF of our catalog by clicking the link below |
|
|
|
|
| |
You can download a PDF of our catalog by clicking the link below |
|
|
| |
You can download a PDF of our Patent catalog by clicking the link below |
|
 |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
| |
|
| |
| |
|
| |
H.C.B-A1979 BMW (E90/E91) TORQUE CONVERTER BRACE
Call for Pricing |
H.C.B-A6101 VW 3.0 CAMSHAFT LOCKING TOOL KIT
Call for Pricing |
H.C.B-A6090 NEW BMW (E60/E61/ E84/E90/E91/F02/F10/ F11//F15/F70) TRANSMISSION RUBBER MOUNT BUSH EXTRACTION / INSTALLATION TOOL KIT
Call for Pricing |
H.C.B-A6105 BENZ(M102/M103/M104 /M111/M601/M602/M603/ M605/M606/M611/M612/ M613/M636/M639/ M646) FLYWHEEL LOCKING TOOL
Call for Pricing |
H.C.B-A6109 HONDA CRV FUEL TANK COVER REMOVAL TOOL
Call for Pricing |
H.C.B-A6128 JLR 2.0 DIESEL TIMING TOOL KIT
Call for Pricing |
|
|
|
|
|
| |
Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.
Browse
| |
* To adjust the brake of HINO #700 truck.
* Conbine with A1415.
* Application : HINO #700
[Product Details...] (product details)
|
|
| |
* Secure the camshaft when checking and adjusting valve timing.
* Specially designed to secure the position for adjusting camshaft
* Application: Audi A3 2013 >, Golf 2013 >, Octavia 2013 >, Leon 2013 >4-cyl. injection engine (1.4l direct injection engi
[Product Details...] (product details)
|
|
| |
* Tool for engine flywheel rotation during the tappets adjustment.
* Application: RENAULT MAGNUM TRUCK/ CAT ENGINE BARRING
[Product Details...] (product details)
|
|
| |
* The C-clamp is forged, its material is SCM440 and hardness is HRC 38˚-42˚
* Specially designed to remove & install the ball joint without removing any parts.
* Application: LAND ROVER V8 (4000 c.c.)
[Product Details...] (product details)
|
|
| |
* The retaining device can position the camshafts in the installed position, also for turning, installing, and removing the crankshaft pulley.
* Application: Mercedes-Benz OM 651 VOLUME 2.0D / 2.2D / 2.5DSome models of cars: Mercedes Benz GLK (W204), Mer
[Product Details...] (product details)
|
|
| |
* Used for correcting the camshaft and crankshaft timing position.
* Four-cylinder EA888 petrol engine: 1.8 R4 16v TSI/TFSI, 2.0 R4 16v TSI/TFSI
* Application: 2006~2013 VAG series TSI, TFSI EA888 engine (1.8L, 2.0L).
* Engine Code: BYT, BZB, CABA, CAB
[Product Details...] (product details)
|
|
| |
* Special designed to rotate the camshaft in TDC position.
* Application: VAG 1.8, 2.0 TSI engine.
* VW OEM no.ref.: FVNST9143-A, FVNST9143-B
[Product Details...] (product details)
|
|
| |
* For checking and adjusting engine timing.
* Application: 1.0L 3-cyl. petrol engines VW up, SKODA Citigo, SEAT Mii since 2011
[Product Details...] (product details)
|
|
| |
* With easy spring reset
* Hydraulic cylinder with thread and protective cap (3/8NPT thread)
* Operating pressure: 700 bar
* Stroke length: 45 mm
* Outer diameter: 80 mm
* Hydraulic cylinder: 17.5 tons
[Product Details...] (product details)
|
|
| |
* Lock the LH side cam sprockets from turning when the timing belt is removed
* Prevent cam sprockets from spinning when belt is removed and eliminate potential valve damage
* Save time! Make timing belt changes faster and easier especially when done wi
[Product Details...] (product details)
|
|
| |
* This tool is designed for the removal/installation of switching valve
* Switching valve's parts no# 651 180 01 15
[Product Details...] (product details)
|
|
| |
* Designed to hold the camshafts and crankshaft in their timed position during belt replacement
* Applications: Citroen C3 (III)/DS3/DS3 Cabrio/C-Elysee and Peugeot 2008/208/308&latest generation Citroen/Peugeot EBO & EB2 1.0L and 1.2L 3 cylinder engines
[Product Details...] (product details)
|
|
| |
* Instruction: No.1 used to remove bearing of 12 speed transmission.
No.2 used to remove gear of 12 speed transmission.
* Clamp is required while removing.
* Application: VOLVO truck (12 Speed)
* OEM ref no.:9998215
[Product Details...] (product details)
|
|
| |
* Size: 90mm × 15 Flutes × Dr. 3/8"
* Application:
Jaguar:
2010 and Newer 5.0L V8 Engines in the XJ, XJL, XK, XKR, XF, XFR and XKR
Land Rover:
2010 and Newer 5.0L V8 Engines in the LR4, Ranger Rover and Range Rover Sport
[Product Details...] (product details)
|
|
| |
* Must be used during wheel alignment to fix the steering shaft in place.
* New bracket and fork sent out to fit new models.
* Application: BMW E60
* BMW OEM no.ref.:83 30 0 494 655(324 150)
[Product Details...] (product details)
|
|
| |
* Feature: Use this tools can install transmssion real oil seal easily and conveniently.
* Application: VOLVO (FM) truck
* OEM no. ref.: 9998575
[Product Details...] (product details)
|
|
| |
* This tool is used to press down the exhaust camshaft for a tension-free removal and installation.
* This tool must be combined with H.C.B-E1188.
* Application: N55
* BMW OEM no.ref: 117 100 (83 30 0 496 672)
[Product Details...] (product details)
|
|
| |
* For removing the rear wheel nut of ROR trailer to change the bearing.
* Size: Dr.1", 8 POINTS, 120mm
* Application: ROR TM series Trailer rear wheel nut.
[Product Details...] (product details)
|
|
| |
* Used when removing unit injector from cylinder head.
* Special design for removing the seized diesel injector from VAG TDI engines.
* Always cool down the engine before using the tool.
* Special two jaws design to fix the injector and pull out with s
[Product Details...] (product details)
|
|
| |
* Please conbined with H.C.B-A1337.
* Application: Cummins (Euro 4)/ DAF (LF 65) 17 TONS
* Screw size : M12*P1.75*35 L (Q’ty: 6 pcs)
[Product Details...] (product details)
|
|
| |
* Instruction: You can use this tool to remove and install the front/ rear bearing of DAF (CF) 35 tons truck differential.
* Application: DAF (CF) 35 tons truck.
[Product Details...] (product details)
|
|
| |
* This tool is used to divide the transmission main shaft, bearing sleeve and gear of ZF 16 speed.
* When the bearing or gear is damage, you can use this tool to divide them from the shaft. It can help you work efficiency and save time.
[Product Details...] (product details)
|
|
| |
* To prevent the crankshaft rear oil seal from damaged when installing it.
* Application: UD truck 17 TONS(1996-2011), FE6TB, FE6TC
* Oil seal genuine no.: BZ6273E
[Product Details...] (product details)
|
|
| |
* Removal of the hub always leaves the inner race on the hub, but this extractor kit allows precise extraction of inner bearing race from the wheel hub.
* The race is impossible to remove without the correct special tool. If removal is operated by makesh
[Product Details...] (product details)
|
|
| |
* Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip.
* Reduces risk of damage to transmission.
* Saves on labor time and suitable for most vehicles.
[Product Details...] (product details)
|
|
| |
* Instruction: This tool is used to prevent the crankshaft rear oil seal from damage when installing it. It is very easy to damage oil seal without using this tool.
* Application:FM12 (420.430.440)
[Product Details...] (product details)
|
|
| |
* Instructions: While servicing a damaged engine, use this lifting tool with a lifting device to hang the camshaft up to avoid collision. Make marks before removing the camshaft for quick and precise installation.
* OEM No.: 9998264
* Application: All V
[Product Details...] (product details)
|
|
| |
* This is a master tool kit for replacing the oil seal of BMW final drive input shaft .
* Application: BMW E70, E90, E91, E92 with N54 B30 engine
[Product Details...] (product details)
|
|
| |
* Special shape design which can get into tight areas of the cylinder head where the injectors are located without touching anything, such as fender.
* Unique flare nut socket design allows for easy access without damaging expensive injectors
* Fit in a
[Product Details...] (product details)
|
|
| |
* This kit is designed for locking crankshaft and camshafts in timing position while servicing BMW B38/B48 engine.
* Application: BMW B38, B48 engine.
* BMW OEM No.: 2 358 122, 2 288 380
[Product Details...] (product details)
|
|
| |
* As with all precision tools, proper use and care is required to assure proper threading and longest tool life.
The inexperienced user should carefully read these instructions.
[Product Details...] (product details)
|
|
| |
* Special designed for the lower control arm ball joint mounting and dismounting.
* For cars with aluminium control arms and steel wishbones alike.
* Adapters size: M12 x 1.75, M14 x 1.5, M14 x 2.0.
* Application:
S60 (2000-2009), S80 (1998-2006), V70
[Product Details...] (product details)
|
|
| |
* Special wrench for VOLVO fuel tank lid.
* Application:
VOLVO V70 (00-)/S80/XC90/S60/V70 XC (01-) / XC70.
Engines: B5204T4, B5204T5, B5234T3, B5234T7, B5244S, B5244S2, B5244S6, B5244SG, B5244SG2,
B5244T3, B5244T4, B5254T2, B6284T, B6294S, B6294S2,
[Product Details...] (product details)
|
|
| |
* The main body is 1400 mm long square tube with two removable supporting stands which can be set on the threaded hole bases of shock absorber upper base for better, steady engine holding.
* There are universal joints on both supporting stands which give
[Product Details...] (product details)
|
|
| |
* Set for refilling fluids such as ATF, gear oil and differential oil.
* Especially designed for vehicles without a transmission dipstick.
* A combination of pneumatic and manual functions allow energy-saving work and precise refilling.
* 12.5L large t
[Product Details...] (product details)
|
|
| |
* For extracting or installing the front subframe ball joint of HYUNDAI PORTER 2.500 C.C.
* Application: HYUNDAI PORTER 2.500 C.C
[Product Details...] (product details)
|
|
| |
* Used when loosening of side shaft on 6-speed manual gearbox 0B2, four-wheel drive.
* Application: Audi A4 2008>, Audi A5 2008>, Audi A5 Cabriolet 2009>, Audi Q5 2009> with 6-speed manual gearbox 0B2, four wheel drive.
* VW OEM no.ref.:T40217
[Product Details...] (product details)
|
|
| |
* Application:
Mercedes: CLK 200K (W209), C180K, C200K, C230K (W203),
C- Coupe C160K, C180K, C200K, C230K, E200K (W211),
SLK 200K (R171), C180K (W204), CLC180K, CLC200K,
C180CGI, C200CGI, C250CGI (W204), E200CGI,
E250CGI (W212, C207)
Engine: 1.6/1
[Product Details...] (product details)
|
|
| |
* Used to fix the flywheel gear to remove & install crankshaft pulley centre bolt.
* Application:
A Class W169 (M166)
B Class W245 (M266, OM640)
* BENZ OEM no. ref.: 166589004000
[Product Details...] (product details)
|
|
| |
* For extracting or installing the front subframe ball joint of Jeep Wrangler.
* Application: Jeep Wrangler.
[Product Details...] (product details)
|
|
| |
* Special front 4 fixing points design for fixing crankshaft pulley and easy removal and installation.
* Application: Foresters 2011~/ WRX2014~/ IMPREZA 1.6 2013~/ IMPREZA XV2.0 2012~/ TRIBECA 3.6 2008~2012
[Product Details...] (product details)
|
|
| |
* Special 4 mounting points design for holding the camshaft pulley of SUBARU vehicles.
* Application: Forester 2.0 2005-2011, Impreza 1.6 / 2.0 2005-2008, Legacy 2005-, Lagacy CVT 2010-2013
[Product Details...] (product details)
|
|
| |
* Used to remove the output shaft from the front axle assembly on 4WD vehicles.
* Application: 525ix, X3, X5
* BMW OEM no. ref.: 315110
[Product Details...] (product details)
|
|
| |
* Function:
Most of oil drain tools use gravity to drain the transmission oil out,
but it is unable to drain out all the transmission oil.
* This transmission oil drain tool kit is able to drain out the rest of transmission oil
cleanly by air pre
[Product Details...] (product details)
|
|
| |
* Function:
This tool kit is designed to remove and install the bush of Toyota rear-axle suspension.
[Product Details...] (product details)
|
|
| |
* Necessary preliminary tasks: Remove trailing arm from wheel carrier
* Application: BMW E81-E93
[Product Details...] (product details)
|
|
| |
* This puller can remove the new compact wheel bearing with or without locking ring.
* This puller is adjustable which can fit most bearings or even new ones in the future.
* This puller is able to be used as a hub puller.
* Application:
BENZ ML W140
[Product Details...] (product details)
|
|
| |
* Engine timing tool kit for positioning valve to timing position and also for pump removal.
* Application:
Ford Fiesta V (‘04-’08)
Ford Fiesta VI (‘08-)
Ford Focus (‘04-)
Ford Focus C Max (‘03-)
Focus C Max Grand (‘10-)
[Product Details...] (product details)
|
|
| |
* Tool for removing/ installing the crankshaft front oil seal.
* Application: 5.0-Liter DFI V8 Engine
* OEM no. ref.: 303-1434
[Product Details...] (product details)
|
|
| |
* Application:
2014-2016 Jaguar-F-Type,
2016 Jaguar –XE,
2010-2016 Jaguar-XF,
2010-2016 Jaguar-XJ,
2010-2015 Jaguar-XK,
2010-2016 Land Rover- LR4,
2010-2016 Land Rover- Range Rover,
2010-2016 Land Rover- Range R
[Product Details...] (product details)
|
|
| |
* Application: JAGUAR and LAND ROVER models with 5.0L V8 and 3.0L V6 engine.
2010 – 2015 JAGUAR XK
2010 – 2016 JAGUAR XF
2010 – 2016 JAGUAR XI
2010 – 2016 LAND ROVER LR4
2010 – 2016 LAND ROVER RANGE ROVER
2010 – 2016 LAND RO
[Product Details...] (product details)
|
|
| |
* Application: Range Rover L322 - 2011-2012, Range Rover L405 - 2013-2017, Range Rover Sport L494 - 2014-2017
* OEM no. ref.: 303-1573
[Product Details...] (product details)
|
|
| |
* Application: P340/P380 (Series 4)，P400/P440/P480 (Series 5)，after year 2010
* Oil seal OEM no.: 1754911
* Oil seal size: 140x160x12 mm
[Product Details...] (product details)
|
|
| |
* Used to remove damper pulley on third generation EA888 engines.
* Application: Used for dismantling and assembling the vibration damper
on 4 cyl. 1.8l, 2.0l, 4V TFSI direct injection engine (timing chain).
[Product Details...] (product details)
|
|
| |
* Combine with H.C.B-A1337 or B1337. And it must work with H.C.B-C1337
* Application: ISUZU (MYY 5T) transmission
* Screw size: M10 x P1.5 x 40L (Q'ty:12 pcs), M10 x P1.5 x 70L (Q'ty:10 pcs)
[Product Details...] (product details)
|
|
| |
* Please use with H.C.B-A1337 or B1337.
* Application: ISUZU (4JJ1 & 4HK1) TRUCK ENGINE
[Product Details...] (product details)
|
|
| |
* Please use with H.C.B-A1337 or B1337.
* Screw size: M10 x P 1.5 x 40L (Q'ty: 7 pcs)
* Application: ISUZU truck (6HK1) engine
[Product Details...] (product details)
|
|
| |
* Please use with H.C.B-A1337 or B1337, it must work with H.C.B-C1337.
* Screw size: M10 x P1.5 x 40L (Q'ty:12 pcs), M10 x P1.5 x 50L (Q'ty:12 pcs)
* Application: ISUZU (MZW 6P) truck transmission
[Product Details...] (product details)
|
|
| |
* Please use with H.C.B-A1337 or B1337.
* Screw size: M8xP1.25x35mmL (Q'ty: 12 pcs)
* Application: ISUZU truck (6WG1/6WF1) engine
[Product Details...] (product details)
|
|
| |
* Special angel designed to remove the nuts from Benz engine mount
* Easy to use with multiple angles
* Operators can use them in many angles instead of four directions
* Size: 16mm/12PT
* Applicable: Mercedes-Benz W220, 210, 203, 221, 211, 20
[Product Details...] (product details)
|
|
| |
* Sizes: #301, #302, #303, #304, #305, #306, #307, #308, #309, #310,
#311, #312, #313, #314, #315, #316, #317, #318, #319, #320,
#321, #322, #323, #324, #325, #326, #327, #328, #3
[Product Details...] (product details)
|
|
| |
* Special angel designed to remove the nuts from Benz engine mount.
* Easy to use with multiple angles
* Operators can use them in many angles instead of four directions
* Size: 17mm/12PT
* Applicable: BENZ W124, 140, 170, 126, 201, 202, 210
[Product Details...] (product details)
|
|
| |
* Application: Mercedes-Benz Model OM 601, 602, 603, 615, 616, 617, M102, 103, 116, 272 and SAAB, BMW
[Product Details...] (product details)
|
|
| |
* This tool is designed for removal of Bosch, Delphi, Denso and Siemens injectors
* Feature a flexible u-joint adaptor for access in restricted areas
[Product Details...] (product details)
|
|
| |
* Application include: Citroen C5 / Jumpy / Xsara, Fiat Ducato JTD,
Peugeot 206 / 307 / 406 / Boxer (2.0 / 2.2 / 2.3 HDI), Mercedes-Benz CDI
(exc. A-Class (Sprinter / Vito), Opel Renault F9Q
[Product Details...] (product details)
|
|
| |
* Application: Mercedes diesel engines OM601/OM602/OM602.9/OM603/
OM604/OM605/OM606/OM617.95/OM661/OM662.
[Product Details...] (product details)
|
|
| |
* This kit is designed to remove/install the differential bushes
* Application: BMW (E81/ E82/ E83/ E84/ E85/ E86/ E87/ E88/ E90/ E91/ E92/ E93)
[Product Details...] (product details)
|
|
| |
* This tool kit is designed for the removal and installation of the injector.
* Application: BMW B38/B48 engine
* BMW OEM No. ref.: 83 30 2 385 417
[Product Details...] (product details)
|
|
| |
* Mount the special tool on the crankshaft, screw in transmission bolt.
* Applicable engine code: N47 D20 01
* BMW OEM no. ref.: 2 285 671
[Product Details...] (product details)
|
|
| |
* Front crankshaft radial seal replacer for Min Cooper with N14 engine which
makes radial seal installation precise and quicker without the risk of damaging the new radial seal.
* Application: Mini Cooper (N14)
* BMW OEM no. ref.: 119 600/601/602
[Product Details...] (product details)
|
|
| |
* Rear crankshaft radial seal replacer for Min Cooper with N14 engine which
makes radial seal installation precise and quicker without the risk
of damaging the new radial seal.
* Before replacing the rear crankshaft radial seal, please remove
[Product Details...] (product details)
|
|
| |
* Size: A1671-14: 14 mm, L: 220 mm, D: 19 mm
A1671-16: 16 mm, L: 220 mm, D: 22 mm
[Product Details...] (product details)
|
|
| |
* A new design tool kit for aligning newer style balance shafts.
* Application: B47/N47/B48 engines in 1, 2, 3, 4 & 5 series, X1, X3, X4, X5, Mini Clubman, Mini Hatch
* BMW OEM no. ref.: 2 288 054
[Product Details...] (product details)
|
|
| |
* Specially designed for removing and installing the injectors seal.
* Application：BMW N13, N14, N18, N20, N26, N43, N53, N54, N55, N63, N73, S55, S63, B38, B48
* OEM no.:130190 ,130191,130280
[Product Details...] (product details)
|
|
| |
* For centering clutch disc on flywheel while installing self-adjusting clutch (SAC).
* Application: S5D-200G, S5D-250G, S5D-260Z, S5D-310Z, S6S-420G, S6S-560G, GS6-37BZ, GS6-37DZ, GS6-53BZ & GS6-53DZ transmissions.
* BMW OEM no. ref.: 212141, 212142,
[Product Details...] (product details)
|
|
| |
* Suitable for Ford Mondeo and Transit models with 2.0, 2.2, 2.4, 3.2 Duratorq Di | TDDi | TDCi diesel engines (01-) and 2.3 Duratec Petrol HE.
[Product Details...] (product details)
|
|
| |
* This tool is designed to installer the oil seal
* OEM no. ref.: T94P-77000-C, CFW 003601, 205-115 (15-058)
[Product Details...] (product details)
|
|
| |
* This kit contains camshaft holding fixtures and chain tensioner hold down tool.
[Product Details...] (product details)
|
|
| |
* Application: Ford Explorer, Mercury Mountaineer with 4.0 L SOHC V6 Engine (1997 - 2002)
[Product Details...] (product details)
|
|
| |
* Application: Type / model: Audi A3 2013 >, Golf 2013 >, Octavia 2013 >, Leon 2013
* Applicable engines: 1.2L TSI – petrol/ 1.4L TFSI – petrol/ 1.4L FSI – petrol/ 1.0L TFSI 4V 3cil – petrol/1.4L TDI CR 3cil - diesel
[Product Details...] (product details)
|
|
| |
* This style connector is often found on mass air flow (MAF) sensor, coil packs, headlights/fog lights, level sensors, and MAP sensors……, etc.
[Product Details...] (product details)
|
|
| |
* Application: Audi A8 2010 >, Audi A6 2011 >
with 8-cyl. 4.0 L, 4V TFSI engine
[Product Details...] (product details)
|
|
| |
* Application: 4-cyl.injection engine (1.8 and 2.0 liter engines), chain drive) Golf 2004>, Passat 2006>, Passat CC 2009>, Tiguan 2008>, EOS 2006>, Audi A3 2004>, Audi A4 2008>, Audi TT 2007, Audi A5 2008>
[Product Details...] (product details)
|
|
| |
* Application: Touareg 2003>, Phaeton 2003>, Audi A4 2001>, Audi A6 2005>, Audi A8 2003>, Audi Q7 2007> with 6-cyl. TDI common rail 3.0 L 4V engine
[Product Details...] (product details)
|
|
| |
* Application: 2008-13 Subaru Impreza, Forester, and Outback with 2.5L engines utilize Stretch Fit belt technology on the A/C compressor drives.
[Product Details...] (product details)
|
|
| |
* Applications:
* Audi: A6, A8, S6.
* VW: Phaeton, Touareg. Engine Types: AKC, ANK, AQF, AQG, AQJ, ARS, ARU, ASG, AUW, AVN, AWN, AXQ, BGH, BGJ, BHX.
[Product Details...] (product details)
|
|
| |
* Application:
Audi A4 2008 >、Audi A5 Cabriolet 2009 >、
Audi A5 Coupe 2008 >、Audi Q5 2008 >、Audi A3 2012 >
4-cyl. 1.8l, 2.0l 4V TFSI direct injection engine(generation III)
* VW OEM no.ref.: T40266
[Product Details...] (product details)
|
|
| |
* Used for filling Mercedes 725 Transmissions.
* Adapter used to replace plug on transmission to allow filling.
* Application: 9G-Tronic 725.0 automatic transmission.(Year 2014~2017)
* BENZ OEM no. ref.: W725 589 00 90 00/W725 589 02 90 00
[Product Details...] (product details)
|
|
| |
* Application:
Jaguar: X150-XK series/X250-XF/X351-XJ
Land Rover: Discovery 4/New Ranger Rover/Ranger Rover Sport
[Product Details...] (product details)
|
|
| |
* Application: 1998 - 2003 XJ8 & 1997 - 2006 XK8
Jaguar X100/XK 1996 - Current/ X308/ V8 XJ 1997 - 2003
[Product Details...] (product details)
|
|
| |
* This tool is designed to adjust the timings for the camshafts
* Used to R & R crankshaft pulley bolt
[Product Details...] (product details)
|
|
| |
* Applications:
Porsche Cayenne 4.8 / 4.8 Turbo (M48 engine, M48 / M52);
Porsche Cayenne 4.5 / 4.5 Turbo (engine M48 / 00, M48 / 50, M48 / 50S);
Porsche Panamera 3.6 (M46 / 40);
Porsche Panamera 3.0 (CGEA).
[Product Details...] (product details)
|
|
| |
* Application:
VOLVO C70 Conv (-05), C70 Coupe (-02), S40 (-04), S60 (-09), S70, S80 (-06), S90 (-98), V40 (-04), V70 (-00), V70 (00-08), V70 XC (-00), V70 XC (01-) / XC70 (-07), XC90 (03-), 850, 960
[Product Details...] (product details)
|
|
| |
* Application:
VOLVO 240, 850, C30, C70 (06-), C70 Conv (-05), C70 Coupe (-02), S40 (-04), S40 (04-), S60 (-09), S60 (11-), S60 Cross Country, S60L, S70, S80 (-06), S80 (07-), S80L, V40 (-04), V40 (13-), V40 Cross Country, V50, V60, V70 (-00), V70 (0
[Product Details...] (product details)
|
|
| |
* Application:
VOLVO 850, C30, C70 (06-), C70 Conv (-05), C70 Coupe (-02), S40 (-04), S40 (04-), S60 (-09), S70, S80 (-06), V40 (-04), V50, V70 (-00), V70 (00-08), V70 XC (-00), V70 XC (01-) / XC70 (-07), XC90 (03-)
[Product Details...] (product details)
|
|
| |
* Application: VOLVO S60 (11-)/ S80 (07-)/ S80L/ V60/ V70 (08-)/ XC60/ XC70 (08-)/ XC90 (03-)
[Product Details...] (product details)
|
|
| |
* This tool kit is for installing the crankshaft rear oil seal of Toyota Camry.
[Product Details...] (product details)
|
|
| |
* Each pry bar features a lockable swivel joint head which can be adjusted into different positions. This kit is perfect for prying into hard-to-reach areas thanks to the flat finish.
[Product Details...] (product details)
|
|
| |
* It is recommended to prevent the engine shafts (e.g. camshafts, crankshaft) from turning or to keep them in a specific position and to adjust the tensioner when changing a timing chain or during other engine repairs.
[Product Details...] (product details)
|
|
| |
* Application: Socket fits between the exhaust manifold and the oil filter for easy removal and installation of the filter.
[Product Details...] (product details)
|
|
| |
* Application: HYUNDAI i30, Tucson and KIA, and
HINO truck year 2003~2006 or after year 2010.
[Product Details...] (product details)
|
|
| |
* Allow quick and easy removal of oxygen sensors, diesel injectors, oil pressure sending units and vacuum switches.
* Heat-treated chrome vanadium and chrome molybdenum steel with black oxide finish.
[Product Details...] (product details)
|
|
| |
* Allow quick and easy removal of oxygen sensors, diesel injectors, oil pressure sending units and vacuum switches.
* Heat-treated chrome vanadium and chrome molybdenum steel with black oxide finish.
[Product Details...] (product details)
|
|
| |
* Remove right-hand or left-hand threaded studs without damaging threads.
* Sizes: 6 mm, 8 mm, 10 mm, 12 mm
[Product Details...] (product details)
|
|
| |
* Transmission can be turned 360∘, thus extraction or installation of any parts of transmission in different angles is able. It is really convenient and useful.
[Product Details...] (product details)
|
|
| |
* Contents:
¼"D T-handle
1 pcs extension bar
8 x 1/4"D Sockets: 5 mm, 6 mm, 7 mm, 8 mm, 10 mm, 11 mm, 12 mm, 13 mm
Plus 18 x 1/4" Hex shank bits: Ph Drive Ph1, Ph2, Ph3, Hex: 3/ 4/ 5/ 6 mm, flathead: 5.5 mm, star tamperproof T10/ T15/ T20/
[Product Details...] (product details)
|
|
| |
* Suitable for nearly all vehicle types
* High-quality materials and provide a long service life
* Dimensions: 1500 mm x 860 mm
[Product Details...] (product details)
|
|
| |
* Features:
1. Light-weight, slim design makes handling easy in tight working spaces and storage.
2. Acme screw allows for precise height adjustment.
3. Self locking Acme threaded screw and bearing mounted spin handle makes adjusting the height
[Product Details...] (product details)
|
|
| |
* Options:
Special color and design are available on request
Delivery without tools and accessories
[Product Details...] (product details)
|
|
| |
* Flow control knob to adjust air speed.
* Interchangeable short nozzle and 4-1/2" in. Long nozzle is optional.
* Nozzles can be used in standard pistol grip mode as well as from the top of the gun for access into fight spots.
* Ergonomic grip, lightw
[Product Details...] (product details)
|
|
| |
* Made from CR-MO material.
* Suitable for using on hoses, spark plug wires, etc...
[Product Details...] (product details)
|
|
| |
* Manometer for H.C.B air pump 3036 series.
* For monitoring hydraulic pressure.
* Maximum detection pressure is 15,000 psi.
[Product Details...] (product details)
|
|
| |
* Removing dents metal plating body.
* It works with most available on the market spotters bodywork.
[Product Details...] (product details)
|
|
| |
* This kit includes 4 Dollies, 3 Hammers.
* Standard hammer, pick/finishing hammer and light shrinking hammer.
* Utility/ curved/ heel & toe dolly.
* Polished mirror finish.
[Product Details...] (product details)
|
|
| |
* This high quality base has a very strong magnet that is easily activated with a convenient switch and can attach to flat or round surfaces up to 45 lbs. of magnetic pull to keep work in perfect alignment
* Product Dimensions: 10.8" x 4.1" x 2.8"
[Product Details...] (product details)
|
|
| |
* Instruction: When the shock absorber leaks, you will need the tool to remove the spring compressor to change the the absorber. It can used with H.C.B-A1246.
* Application: Volvo FM truck.
[Product Details...] (product details)
|
|
| |
* For trucks with single or double disc clutches (universal)
* This tool set allows the correct alignment of single or double disc clutches of trucks and tractors to the engine.
* Mandrel NO.1 is applicable on interior clutch hub-ø from 36-45mm inside.
[Product Details...] (product details)
|
|
| |
* Sizes: 3420A/3421B/3422C/3423D/3424E/3425F/3426G/3427H/3428I/3429J
* Material: SCM440 chrome plated
[Product Details...] (product details)
|
|
| |
* Maximum capacity: 300 kgs
* Grip range: Ø 420 mm ~ Ø 620 mm
* Used for fast loading and unloading of maximum 300 KGS barrel.
* Can work with H.C.B-A2014 or hook from forklift.
[Product Details...] (product details)
|
|
| |
* Camshaft timing tool for locking the camshaft and timing chain while
servicing, and a valve spring compressor for valve or rock arm service.
* Application: Ford 4.6 L/ 5.4 L/ 6.8 L 3 V engine.
* Ford OEM no. ref.: 567614, 567617
* Applicatio
[Product Details...] (product details)
|
|
| |
* Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners which
[Product Details...] (product details)
|
|
| |
* Torque multiplier can turn small amounts of input torque into large output torque to loosen the toughest threaded fasteners which
[Product Details...] (product details)
|
|
| |
* Application: Audi Q7, Touareg 2010 and up, Porsche Cayenne.
* VW OEM no. ref.: T40139
[Product Details...] (product details)
|
|
| |
1. Just turn the handle to switch the gear direction in a blink. (No need to stop and turn the switch to change the gear direction.)
2. Push down the collar to extend the handle.
[Product Details...] (product details)
|
|
| |
* Tool to remove crankshaft front gasket.
* Application: IVECO F1C ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY
* IVECO OEM no.ref.:99340059
* FUSO OEM no.ref.:MH063989
[Product Details...] (product details)
|
|
| |
* Tool to remove crankshaft rear gasket.
* Application: IVECO F1C ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY
* IVECO OEM no.ref.:99340060
* FUSO OEM no.ref.:MH063961
[Product Details...] (product details)
|
|
| |
* Tool to remove injectors.
* Application: IVECO DAILY F1C ENGINE (EURO 5) / FUSO LIFT CARS(EURO 5)
* Models: DAILY M.Y.2009
* IVECO OEM no.ref.:99342156
* FUSO OEM no.ref.: MH064377
[Product Details...] (product details)
|
|
| |
* The tool is designed for crankshaft front gasket installation and timing cover centering.
* Application: IVECO F1C ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY
* IVECO OEM no.ref.:99346258
* FUSOO OEM no.ref.:MH063962
[Product Details...] (product details)
|
|
| |
* Centring ring for timing gear cover (use with IV1005)
* Application: IVECO F1C ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY
* IVECO OEM no.ref.:99396039
* FUSO NO.: MH063979
[Product Details...] (product details)
|
|
| |
* Crankshaft rear seal installer
* Application: IVECO F1C ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY
* IVECO OEM no.ref.:99346259
* FUSO NO.: MH063963
[Product Details...] (product details)
|
|
| |
* Oil pump drive shaft retaining tool
* Application: IVECO F1C-F1D ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY
* IVECO OEM no.ref.:99360187
* FUSO OEM no.ref .:MH063965.
[Product Details...] (product details)
|
|
| |
* Engine valves spring remover/installer
* Application: IVECO F1A-F1C ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY-DUCATO
* IVECO OEM no.ref.:99360260
* FUSO NO.: MH063966
[Product Details...] (product details)
|
|
| |
* Flywheel restrainer
* Application: IVECO F1A-F1C ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY
* IVECO OEM no.ref.:99360306
* FUSO OEM no.ref.:MH063967
[Product Details...] (product details)
|
|
| |
* Tool for camshaft timing
* Application: IVECO F1A ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY-DUCATO
* IVECO OEM no.ref.:99360614
* FUSO OEM no.ref.:MH063968
[Product Details...] (product details)
|
|
| |
* Tool for crankshaft timing
* Application: IVECO F1A ENGINE / FUSO LIFT CARS(EURO 5)
* Models: DAILY-DUCATO
* IVECO OEM no.ref.:99360615
* FUSO OEM no.ref.:MH063969
[Product Details...] (product details)
|
|
| |
* To assist when mounting wheels, especially latest models with iron lug bolts.
* Material: Steel S45C
* Surface finish: Chrome
* Size: M12 x P 1.5 (Male), M14 x P 1.5, M14 x P 1.25, M12 x P1.5 (Female),M 16 x P 1.5, M12 x P1.25 (Female)
[Product Details...] (product details)
|
|
| |
* Used for aligning the camshaft to TDC.
* Application: Mercedes-Benz AMG C63, C63S with biturbo 4.0L, petrol V8 engine, engine code: M177, M178 (After 2015)
* BENZ OEM no. ref.: 177589014000, 177589001500.
[Product Details...] (product details)
|
|
| |
* Contents:
#944L, #945L, #946L, #947L, #948L, #949L, #950L, #951L, #952L, #953L,#065P,
#121P, #651P, #071P, #072P, #076P, #079P, #944P, #945P, #951P,
[Product Details...] (product details)
|
|
| |
* Size:
#7601, #7602, #7603, #7604, #7605, #7606, #7607, #7608, #7609, #7610, #7611, #7612, #7613, #7614, #7615, #7616, #7617, #7618, #7619, #7620
* Material: SCM440 CHROME PLATED
[Product Details...] (product details)
|
|
| |
* Function:
This tool kit is designed to remove and install the
rear-axle suspension bush of Toyota MPV, and Corolla.
* Application:
TOYOTA VOXY/ VELLFIRE/ ALPHARD/ ESTIMA/ CAMRY/ HARRIER/
NOAH/ PREVIA/ MARK ll / ISIS/ WISH/ PICNI/ ALTIS/ COROLLA
[Product Details...] (product details)
|
|
| |
* Special tool for safe, quick, labor-saving removal of the CV joint for most car models. (With this tool, there is no need wasting time
and labor on hammering the CV joint for removal.)
* Smaller size with higher rigidity than the others in the mar
[Product Details...] (product details)
|
|
| |
* Designed for dual gear engine flywheel rotation for timing.
* Suitable for Euro Cargo/ Cargo Eurotech/ Heavyon/ Off Road/ Bus models.
* Engine models: 8040-25-45/ 8060-25-45/ 8460/ 8260/ 8280/ 8210.42/ 190.38/ 190.42
[Product Details...] (product details)
|
|
| |
* Applications: Agila, Astra F/G/H, Calibra, Corsa B/C/D, Meriva, Omega B, Signum, Speedster, Tigra A/B, Vectra B/C, Zafira A/B.
[Product Details...] (product details)
|
|
| |
* Applications:
Agila, Astra F/G/H, Calibra, Corsa B/C/D, Meriva, Omega B, Signum, Speedster, Tigra A/B, Vectra B/C, Zafira A/B.
[Product Details...] (product details)
|
|
| |
* Applications: Agila, Astra F/G/H, Calibra, Corsa B/C/D, Meriva, Omega B,
Signum, Speedster, Tigra A/B, Vectra B/C, Zafira A/B.
[Product Details...] (product details)
|
|
| |
* Applications: Agila, Astra F/G/H, Calibra, Corsa B/C/D, Meriva, Omega B,
Signum, Speedster, Tigra A/B, Vectra B/C, Zafira A/B.
[Product Details...] (product details)
|
|
| |
* Used for the removal or installation of click style Fuel/EVAP hose clamps.
* Rotatable head for reaching the clamps at any angle.
* Spring loaded and proper grip for a good handling.
[Product Details...] (product details)
|
|
| |
1. Just turn the handle to switch the gear direction in a blink. (No need to stop and turn the switch to change the gear direction.)
2. Push down the collar to extend the handle.
* Description: 3/8" Dr. Professional Extendable Handle Ratchet Wrench 60
[Product Details...] (product details)
|
|
| |
* This kit includes Dr. 1/2", 10 - 24 mm hexagon sockets.
* Ideal for using with 1/2" ultra short impact wrench
[Product Details...] (product details)
|
|
| |
* Used to rotate the cam phasers when tightening the timing chain.
* Application: Type / model: Audi A6 2011 >, Audi A7 Sportback 2011 >, Audi A8 2010 >
* Assembly group: 8-cyl. 4.0l TFSI direct injection engine
* VW OEM no. ref.: T40269
[Product Details...] (product details)
|
|
| |
* Used for tensioning timing chain via camshaft adjuster.
* Application: 6-cyl., 3.0 L, 4V supercharged direct injection engine (generation IV).
* VW OEM no. ref.: T40297
[Product Details...] (product details)
|
|
| |
* This tool kit is used on removal/ installation of BMW rear subframe front/rear bush.
* Application: BMW (E60/ E61/ E63/ E64)
[Product Details...] (product details)
|
|
| |
* Instruction: After the service technician removed the engine, the A1837 can be used to secure
the engine that engineer can easily service any part of the engine. Without this tool, the
engineer spends a lot of time servicing the engine.
* Appl
[Product Details...] (product details)
|
|
| |
* This tool kit is designed to replace the rear control arm bush of Volkswagen T5 on car.
* With this tool, the bush can be extracted and installed without any damage.
* Due to the special shape of the bush, air impact wrench is highly recommended for r
[Product Details...] (product details)
|
|
| |
* The free wheeling mechanism is used for transporting vehicles with failed ISM.
* Raise vehicle(on lift or using vehicle jack) and remove either the left or right rear wheel.
[Product Details...] (product details)
|
|
| |
* Ratcheting safety design ensures stands will remain locked even under the heaviest loads.
* Convenient handles are mounted to frame and column release.
* Specifications：
Min. Height (mm): 390
Max. Height (mm): 605
Base Dimensions: 10-1
[Product Details...] (product details)
|
|
| |
* Application:
2004-2009 Dodge Durango 3.7, 4.7 Engine
2005-2011 Dodge Dakota 3.7, 4.7 Engine
2005-2014 Jeep Grand Cherokee 3.7, 4.7 Engine
2005-2010 Jeep Commander 3.7, 4.7 Engine
2007-2009 Dodge Aspen 3.7, 4.7 Engine
2006
[Product Details...] (product details)
|
|
| |
* Application: 1995-2010 Dodge/ Chrysler cars, trucks, SUVs and vans equipped with 3.5 L V6 engine.
[Product Details...] (product details)
|
|
| |
* Application: V6 engine
2005-2006 Buick Lacrosse 3.6L vin 7
2004-2006 Buick Rendezvous 3.6L vin 7
2004-2006 Cadillac CTS 3.6L vin 7
2005-2006 Cadillac STS 3.6L vin 7
2004-2006 Cadillac SRX 3.6L vin 7
2004-2006 Cadillac CTS 2
[Product Details...] (product details)
|
|
| |
* Application:
Jeep Cherokee 2.8CRD with Engine Code ENS (51C) from 2008-2011
Chrysler Grand Voyager with Engine Code VM64C from 2008-2011
For 2014 and later Chevy & GMC trucks with 2.8L (LWN) or 2.5L (LKH) "Baby" Duramax Turbo-Diesel.
[Product Details...] (product details)
|
|
| |
* This tool is required to help keep the lower timing gear tensioner stationary while the cylinder head is removed from the I4,I5,I6 engines.
[Product Details...] (product details)
|
|
| |
* A complete size of oil filter wrench would help the engineer do more maintance.
[Product Details...] (product details)
|
|
| |
* Application:
- BMW 118, 120, 318, 320, 325, 330, 335, 520, 525, 530, 535, 635, 720, X3, X5
- Audi A3 1.6/ 2.0D
- Seat Altea, lbiza 1.6/ 2.0D
- Skoda Octavia, Yeti 1.6/ 2.0D
- Volkswagen Eos, Golf, Passat, Polo, Scirocco 2.0D
- Chrysler
[Product Details...] (product details)
|
|
| |
* Application:
Citroen C5.Peugeot 406 with petrol driven engines (EW10D)
Citroen (596001), Bosch (ZR8TPP15/ FR8ME) spark plugs, NGK LFR5B / ILFR5B / LFR5A-11 / PLFR5A-11, and DENSO K16HPR-U11 / IKH16 / VKH16.
[Product Details...] (product details)
|
|
| |
* Application:
2011 (Journey, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L)
2012 (Journey,
[Product Details...] (product details)
|
|
| |
* Application:
2004-2006 Chevrolet Colorado 2.8L
2004-2006 GMC Canyon 2.8L
2002-2004 Oldsmobile Bravada 4.2L vin S
2004-2006 Buick Rainier 4.2L vin S
2002-2008 Chevrolet Trailblazer 4.2L vin S
2002-2006 GMC Envoy 4.2L vin S
[Product Details...] (product details)
|
|
| |
* Specially cut-socket (19 mm) for quick and easy loosening and tightening the union nut at high pressure lines of common rail diesel engines.
[Product Details...] (product details)
|
|
| |
* Specially cut-socket (21 mm) for quick and easy loosening and tightening the union nut at high pressure lines of common rail diesel engines.
[Product Details...] (product details)
|
|
| |
* Applicable: BENZ, BMW, FORD, MITSUBISHI, HONDA, VW, AUDI, NISSON, VOLVO, TOYOTA…etc.
[Product Details...] (product details)
|
|
| |
* Used to lock the flywheel.
* With gear holder, 3 bolts, 3 washers, 2 round spacers, 1 stepped spacer.
* BMW OEM no. ref.: 83 30 0 493 938/0493938/119260
* Application: N73, M47TU, M54, M57T2 ,M57, M57TU, N40, N42, N43,
N45, N45T, N46, N46T, N51,
[Product Details...] (product details)
|
|
| |
* Complete engine timing tool kit for setting the camshaft and crankshaft of Jaguar and Land Rover 2.0 GTDi engine.
[Product Details...] (product details)
|
|
| |
* Hook the tool onto the gear, install the ring to the main body. And turn the spindle to pull out the gear.
This tool designed for hydraulic. It make repair quickly and save time.
* Application: VOLVO (FM 440/ 500/ FH 540) truck, Renault 43 DXI
[Product Details...] (product details)
|
|
| |
* This tool is used to support the engine block when removing the cylinder head. Mount between the frame rail and alternator mounting bracket.
* Application :
2007-2010 R56 Cooper and Cooper S Hatchback
2008-2010 R55 Cooper and Cooper S CLUBMAN
[Product Details...] (product details)
|
|
| |
* Application: BMW N20/ N26 engine with automatic transmission.
* BMW OEM no. ref.: 83 30 2 222 742
[Product Details...] (product details)
|
|
| |
* For replacing the transmission clutch.
* Application: DPS6/6DCT250 Transmission
Fiesta (2011~2018)
Focus (2010~2018)
Focus RS (2016~2018)
* FORD OEM no. ref.: 307-675
[Product Details...] (product details)
|
|
| |
* Application: Various VOLKSWAGEN Group models:
Audi: A1 (12-15), A1 Sportback (12-15), A3 (13-15), A3 Sportback (12-15)
Seat: Ibiza (12-17), Leon (12-15), Toledo (12-17)
Skoda: Fabia II (10-15), Fabia III (14-17), Octavia II (10-13), Octavia III
[Product Details...] (product details)
|
|
| |
* Designed for changing the oil filter on DSG gearboxes built in to VAG vehicle.
[Product Details...] (product details)
|
|
| |
* Application:
Ford Transit and Ford Ranger with:
2.2L Duratorq-TDCi (Global Puma) Stage V Diesel : 2006.5 (04/2006-)
2.2L Duratorq-TDCi (Puma) Diesel : 2012 (04/2011-)
3.2L Duratorq-TDCI (Puma) Diesel : 2012 (04/2011-)
[Product Details...] (product details)
|
|
| |
* Application:
Injection nozzle puller tool for removing damaged diesel injectors.
A special window socket with an inside diameter of Ø 29 mm to help remove
the injector from the cylinder head and a ball bearing insert for positioning
the
[Product Details...] (product details)
|
|
| |
* Application:
Ford: B-MAX, C-MAX, EcoSport, Fiesta, Focus, Grand C-MAX
Engine: 1.0 EcoBoost, 1.0 SCTi EcoBoost
Engine codes: SFJA, SFJB, M1DA, M2DA, M1JC, M1JE, P4JA, P4JB, FORD
B-MAX
1.0 EcoBoost SFJA 2012-2014
1.0 EcoBoost SFJB 2012-
[Product Details...] (product details)
|
|
| |
* Application - Diesel:
Ford; 1.4, 1.6TDCi, 1.8DT/TDCi/TDdi, 2.0 TDCi - Courier (00-02),
Fiesta (02-09), C-Max (03-08), Focus (98-00), Fusion (02-08),
Galaxy (06-08), Mondeo (07-08), S-Max (06-08),
Tourneo Connect (02-08), Transit Connect (02
[Product Details...] (product details)
|
|
| |
* Application: Ford 1.8/2.0/2.3/2.4/3.2 Lynx and Puma diesel from 2002
to 2007 found in Mondeo, Focus, Transit and Fiesta.
[Product Details...] (product details)
|
|
| |
* Application: Ford Transit from 2011, 2.2 TDCi (Puma) also builtin to Land Rover
Defender 2.2 TD4 2001 to 2015
[Product Details...] (product details)
|
|
| |
* For removal and installation of sealing cap of the vacuum pump.
* Application: BMW N53, N54, N55 engine.
* BMW OEM no. ref.: 118 530/ 110 290 /118 650
[Product Details...] (product details)
|
|
| |
* Application:
FORD 2.0, 2.2L diesel engine TDCI/ HDI on Focus, Mondeo, S Max, Galaxy,
Euro 6 compliant engines from 2010 onwards.
Citroen & Peugeot 2.2 HDI (DW12C) from 2010, 2.0 HDI (DW10C)from 2009,
Jaguar XF 2.2D from 2012
[Product Details...] (product details)
|
|
| |
* Application:
BMW: X1 (E84), X3 (E83), X3 (F25), X5 (F15), 5 Series Gran Turismo (F07), 5 Series (F10/11),
4 Series Cabriolet (F33), 4 Series Coupe (F32), 4 Series Gran Coupe (F36), 5 Series (E60/61),
3 Series (E90/91/92/93), 3 Series (F30/31)
[Product Details...] (product details)
|
|
| |
* For setting the crankshaft at TDC. (longitudinal installation with automatic transmission only).
[Product Details...] (product details)
|
|
| |
* For removal and installation of the magnetic actuator.
* BMW OEM No. ref.: 2 360 895
[Product Details...] (product details)
|
|
| |
* Application:
Jaguar: 2012 to Current
Range Rover: 2012 to Current
* OEM no. ref.: JLR-303-1621.
[Product Details...] (product details)
|
|
| |
* Application: VW UP 2012 > Assembly group: 3-cyl. 4V injection engine
Jetta Hybrid 2013, 1.4 TSI Assembly group: 4-cyl. 4V injection engine
[Product Details...] (product details)
|
|
| |
* Application: DAF (CF 85) (Euro 4/5)
* Engine code :410/ 460
* Injector genuine no.: 1905001
[Product Details...] (product details)
|
|
| |
* Used to guide the piston into the cylinder sleeve during piston installation.
* Application: DAF (460P) (EURO 4/5)
[Product Details...] (product details)
|
|
| |
* Application: HINO (JO8C/JO8E) truck.
* This tool is designed to remove/install the injector cooper sleeve.
* Sleeve no. ref: 111761190
[Product Details...] (product details)
|
|
| |
* This puller is designed to remove injector nozzles.
* Application: HINO (JO8C/JO8E)
[Product Details...] (product details)
|
|
| |
* Normally, the removal of bearing is done by cutting, but it'll cause the damage of main shaft.
Using this tool kit can makes the removal of bearing done quickly, safely, and prevents the bearing from damage.
* Application: FUSO (330) truck
[Product Details...] (product details)
|
|
| |
* Normally, the removal of bearing is done by cutting, but it’ll cause the damage of main shaft.
Using this tool kit can makes the removal of bearing done quickly, safely, and prevents the bearing from damage.
* Application: VOLVO (FM12) truck
[Product Details...] (product details)
|
|
| |
* Feature: This ball joint is a special shape, the tool is with a special design to apply the ball joint.
* Instruction: The tool used to remove the end ball joint of the drag link of VOLVO(FM12/ FM/ FH).
* Application: VOLVO (FM12/ FM/ FH) truck.
[Product Details...] (product details)
|
|
| |
* Instruction: This tool kit is to remove and install the main shaft bearing of DAF (CF) 35 tons truck differential.
* Application: DAF (CF) 35 tons truck.
[Product Details...] (product details)
|
|
| |
* Instruction: This tool kit is to remove / install the main shaft bearing and remove /
install the front / rear bearing of DAF (CF) 35 tons truck differential.
* Application: DAF (CF) 35 tons truck
[Product Details...] (product details)
|
|
| |
* Instruction：This tool can help you install the bearing with even force.
Avoid bad installation.
* Bearing no.:
F-566283.01-H195
L.100-184255
L.101-053736
[Product Details...] (product details)
|
|
| |
* Instruction：This tool can help you install the bearing with even force.
Avoid bad installation.
* Bearing no.: F-566193-H195
[Product Details...] (product details)
|
|
| |
* Instruction：This tool can help you install the bearing with even force.
Avoid bad installation.
* Bearing no.: F-566074-H195
L.071-174110
L.072-031741
[Product Details...] (product details)
|
|
| |
* Instruction: This tool is used to timing gear.
* Application:FM12 (420.430.440)
[Product Details...] (product details)
|
|
| |
* Instruction: Socket for lift axle nut.
* Grooved lock nut.
* Application: BENZ trailer axle TZ5/2, TE5/2 with conventional bearing
[Product Details...] (product details)
|
|
| |
* This tool kit can disassemble the hub, wheel axle, nut…, etc for all the process of regular service and maintenance.
[Product Details...] (product details)
|
|
| |
* Application:
ISUZU ELF 3.5 tons (4JJ1) (150HP)(After 2011)
ISUZU NPR DIESEL (4JJ1) (LFB) SINGLE CAB (2011- 2015)
ISUZU (2011~)
[Product Details...] (product details)
|
|
| |
* Application:
ISUZU ELF 3.5 tons (4JJ1) (150HP)(After 2011)
ISUZU NPR DIESEL (4JJ1) (LFB) SINGLE CAB (2011- 2015)
ISUZU (2011~)
[Product Details...] (product details)
|
|
| |
* During the service procedure, if the removal of steering column is required, this wrench can directly remove the nut of steering column in narrow space without the need of disassembling the other parts to access the nut which significantly simplify the
[Product Details...] (product details)
|
|
| |
* This valve spring compressor allows quicker, easier service
of camshaft, valve seal, valve spring, or retainer.
* Application: Ford vehicles with 4.6 L/ 5.4 L/ 6.8 L 3V engine.
* FORD OEM no. ref.: 303-1039
[Product Details...] (product details)
|
|
| |
* Application: BMW E70/E90/E91/E92/E93/F01/F02/F04/ F06/F07/F10/F13/F15/F16/ F18/F20/F21/F22/F23/F25
E90 (335d, 335i,335ix)
E91 (335d, 335i,335ix)
E92 (335d, 335i,335ix)
E93 (335ix)
E92 with N54 B30 engine
[Product Details...] (product details)
|
|
| |
* Application: BMW N20
* BMW OEM no. ref.: 83 30 2 318 117/ 83 30 2 212 825/114 120
[Product Details...] (product details)
|
|
| |
* This kit is designed to isolate A/C system components for closed loop flushing on car, hence there is no need of removing components from the vehicle.
[Product Details...] (product details)
|
|
| |
* Choose the appropriate clamps to fix the hose, then use the pliers install the adaptor into the hose.
* Applicable size: Ø 6 mm, Ø9 mm, Ø12 mm, Ø14 mm, Ø18 mm
[Product Details...] (product details)
|
|
| |
* Choose the appropriate clamp to fix the hose, then use the pliers install the adaptor into the hose.
* Applicable size: Ø 6mm, Ø9 mm, Ø12 mm, Ø14 mm, Ø18mm
[Product Details...] (product details)
|
|
| |
* For replacing the front crankshaft seal.
* Applications: BMW N20/N26
* BMW OEM no. ref.: 110 371/ 110 372/ 2 212 822/119 231/ 119 233
[Product Details...] (product details)
|
|
| |
* Applications: B-Max 2012 /C-Max 2010/Fiesta 2013/Focus 2011/Galaxy from
2010/Grand C-Max 2010/Kuga 2013/Mondoe 2010/S-Max 2010/
Tourneo Connect 2013/Transit Connect 2013
Engine codes: JQMA, JQMB, JTMA, IQJA, JQDA, JQDB, JTDA, JTDB, IQDA,
[Product Details...] (product details)
|
|
| |
* Specifically designed for holding the sprocket/chain in place when disassembling
the VP44 Injection pump and high pressure pump common rail.
* Application: BMW M47/M47T2/M47TU/M57/M57TU BMW 318D | 320D (E46) 1988-2005 and 318TD |
320TD | 525D |
[Product Details...] (product details)
|
|
| |
* Removes the front suspension ball joints quickly, safely and efficiently without damage
* 19mm (3/4") hexagon drive spindle can be turned with a wrench or impact wrench
* 41mm hex on the main socket body is for holding in place while servicing
[Product Details...] (product details)
|
|
| |
* For remove/install the front differential oil seal ring
* Size: Dr.1/2"
* Application: SUBARU AWD transmission
* SUBARU OEM no.ref.: 18658AA020
[Product Details...] (product details)
|
|
| |
* The retaining device can position the camshafts in the installed position, also for turning, installing, and removing the crankshaft pulley.
* BENZ OEM no.ref.: 651 589 09 40 00/ 651 589 07 40 00
[Product Details...] (product details)
|
|
| |
* TECHNICAL DATA
Air inlet thread : Inside thread (IG) 12.91 mm (1/4")
Coupler plug : nominal size 7.2 (included)
Hose diameter (recommended) : 10 mm
Working pressure (bar) : 6.3 bar
[Product Details...] (product details)
|
|
| |
* Size: 12/ 14/ 16/ 17/ 18/ 19 mm
* Single Hex profile x Dr. 3/8”
* Flexible head can access limited, narrower space which ordinary wrenches can’t.
* Made by hot forging increases the torque capacity which is far superior than most wrench in the market
[Product Details...] (product details)
|
|
| |
* This tool is used to compress the valve spring for quick and safe removal/ installation of the valve spring.
* Application: BMW S63TU engine
* BMW OEM no. ref.: 2 249 160
[Product Details...] (product details)
|
|
| |
* Bearing puller with excellent and thicker structure for removing the bearing of heavy duty vehicles and trucks.
[Product Details...] (product details)
|
|
| |
* Designed for checking/ changing/ adding transmission oil on a Mini cooper
due to the narrow space between fill plug and power steering unit.
* Small size makes removal and installation of the fill plug in such
narrow space much easier, and quick
[Product Details...] (product details)
|
|
| |
* Application
U-Joints with bearing cups 1.5″ to 2.2″ O.D.
Spicer 1610, 1710, 1760, 1810, 1880 Series
Spicer SPL 140, 170, & 250 Life Series
Meritor (Rockwell) 16N, 17N, 18N, 1710 Series
Meritor RPL 20, 25 Permalube Series
[Product Details...] (product details)
|
|
| |
* Designed for align the camshaft timing angle for correct position
* Designed for changing the timing chain, replacing the cylinder head gasket.
* Application: PORSCHE MACAN 3.0DS/3.0S/3.6 Turbo/ V6TT(2014~) Engine codes: MCT.M / MCT.L
[Product Details...] (product details)
|
|
| |
* Application:
BMW E90,E91, E92, E60, E61, F07, F10, F11, F01, F02, E84.
transmission type: ATC300、ATC350、ATC35L、ATC450.
[Product Details...] (product details)
|
|
| |
* The crankshaft redial sealing ring has both a lip and a protective lip.
* This tool is designed to prevent damage when assembling the cover to the crankshaft flange.
* Application: BMW（B37C / B37D / B38A / B38B）
* BMW OEM no. ref.: 2 35
[Product Details...] (product details)
|
|
| |
* For the repair and restoration of damaged threads.
* The kit includes self tapping threaded inserts, thread insert holders and bit holders
* Inserts cut own thread when inserting into oversize drilled hole
[Product Details...] (product details)
|
|
| |
* A new type of lock ring tool which makes dismounting and mounting of wheel bearing lock rings very easy.
[Product Details...] (product details)
|
|
| |
* C1641 remove the C-ring fast and easily without damaging it.
* Range: Dimension from 65 mm ~ 175 mm C-Ring.
* With especially enlarge main body, it applys on bigger C-ring than A1641 does
[Product Details...] (product details)
|
|
| |
* For removal and replacement of the crankshaft bolt.
* Application: BENZ (M271)
* BENZ OEM no. Ref.: 271 589 03 40 00
[Product Details...] (product details)
|
|
| |
* For detaching the spark plug connector.
* Applicable Engine: 272.980/ 985/ 980
* BENZ OEM no. ref.: 272 589 013 300
[Product Details...] (product details)
|
|
| |
* For holding the camshaft during timing chain replacement procedure.
* Application: Benz M112, M113 engine.
* BENZ OEM no. ref.: W112 589 05 40 00
[Product Details...] (product details)
|
|
| |
* Designed for aligning the camshaft, loosen and insert the sprocket, and rotating the crankshaft.
* Application: BENZ M651/ Models: 204 / 639 / 906.
* BENZ OEM no.ref.: 60831800, 60831830, 60831820, 60831810
[Product Details...] (product details)
|
|
| |
* Used to fix the flywheel gear to remove & install crankshaft pulley center bolt.
* Application: M133/M270/M607/M651
* BENZ OEM no. ref.: 270 589 00 40 00
[Product Details...] (product details)
|
|
| |
* Used to lock cams and flywheel.
* Application: Mercedes with engine OM111, OM271, OM601, OM602, OM603, OM604, OM605,
OM606, OM611, OM612, OM613, OM646, OM647, OM648
* BENZ OEM no. ref.: BENZ :602 589 00 4000/Chrysler: 8929
[Product Details...] (product details)
|
|
| |
* For keeping timing chain and camshaft sprocket engaged.
* BENZ OEM no. ref.: 642 589 01 40 00
[Product Details...] (product details)
|
|
| |
* M642 in TYP 207, 212, 218 with CODE 927 It requires
H.C.B-A1613 + H.C.B-B1613
* For engine 642 in TYPE 204, 207, 212, 218 except for CODE 927
* It requires H.C.B-A1613 + H.C.B-B1613 + H.C.B-C1613
[Product Details...] (product details)
|
|
| |
* Application: BENZ Engine 112, 113, 137,155, 156, 272/ 979, 273, 629, 642/ 992
[Product Details...] (product details)
|
|
| |
* Designed for installing the crankshaft front oil seal without damage, capable to locate and guide to its position.
* Applications: BENZ M133/M270/M274
* BENZ OEM no. ref.: 270 589 00 15 00
[Product Details...] (product details)
|
|
| |
* Designed for installing the crankshaft front oil seal without damage,
capable to locate and guide to its position.
* Application: BENZ M642
* BENZ OEM no. ref.: 642 589 00 14 00.
[Product Details...] (product details)
|
|
| |
* This wrench effectively compresses hydraulic belt tensioner (vehicles with air conditioning and/or stop-start function)
* An essential tool for releasing or clamping the damper.
* Applications:
A-Class W169 2004-2012 (A150, A160, A170, A180,
[Product Details...] (product details)
|
|
| |
* Adapter used to replace plug on transmission to allow filling.
* BENZ OEM no. ref.: W725 589 00 90 00 W725 589 02 90 00
[Product Details...] (product details)
|
|
| |
* Trailing arm bush tool for BMW E36 and E46 3-Series.
* Note: This tool can’t use with E46 cars, and some E36 cars with the newer bushing style. It requires H.C.B-B1087 to work with.
[Product Details...] (product details)
|
|
| |
* This tool kit is used on removal/ installation of BMW rear subframe front/rear bush.
* Application: BMW (F25)
[Product Details...] (product details)
|
|
| |
* Screw this tools inside the left and right side of rear axle carrier front rubber mounting .
* Application:BMW G11/G12
* BMW OEM no. ref.: 2 411 678
[Product Details...] (product details)
|
|
| |
* For replacing the crankshaft front seal.
* Application: BMW B37/B47/B48/B57/B58/N47/N57
* BMW OEM no. ref.: BMW 118 800
* BMW OEM no. ref.: BMW 118 800
[Product Details...] (product details)
|
|
| |
* For replacing the crankshaft rear seal.
* Application: BMW B37/B47/B57/N47/N57
* BMW OEM no. ref.: BMW 118 810
[Product Details...] (product details)
|
|
| |
* Designed for locking counterbalance shaft in timing position while servicing BMW B38/B48 engine.
* Application: BMW B38, B48 engine.
* BMW OEM no. ref.: 83 30 2 358 646
83 30 2 288 943
[Product Details...] (product details)
|
|
| |
* This is an engine timing support tool for BMW 1.2, 1.5, 2.0 petrol and diesel engines.
* Applications:
BMW 2,5, i8, X3, X4 Series (2014-2017), 1, 3, 7, X1, X5 Series (2015-2017), 4 Series (2016-2017)
Mini Hatch (2014-2017), Mini Clubman (20
[Product Details...] (product details)
|
|
| |
* This tool is used for testing oil pressure.
* Application: 2013 - N20 & N26 after 1/2012 and N46
* BMW OEM ref: 119 250
[Product Details...] (product details)
|
|
| |
* Applications: N47 engine/ F30/F31/F25
* This tool is used to correct the counterbalance shaft position on the N47 engine.
* BMW OEM no. ref.: 83 30 2 288 054
[Product Details...] (product details)
|
|
| |
* For fitting the sealing cap in the crankcase (N55 with HDP5).
* Application: N53/N54/N55
* BMW OEM no. ref.: 2318118/2318119
[Product Details...] (product details)
|
|
| |
* For removal and installation of sealing cap of the vacuum pump.
* For fitting the sealing cap in the crankcase (N55 with HDP5).
* Application: BMW N53/N54/N55 engine.
* BMW OEM no. ref.: 118 530/ 110 290 /118 650
[Product Details...] (product details)
|
|
| |
* Designed for flywheel fixing of transmission before the engine dismantling.
* Application: BMW N20/N26/N43/N55
[Product Details...] (product details)
|
|
| |
* For the new central screw connection on the centring valve of the camshaft timing.
* Chrome Molybdenum with black phosphate finish.
* Application: BMW & Mini Vanos unit and Ford VCT modules.
[Product Details...] (product details)
|
|
| |
* Application:
Cooper JCW (2013-15)
Cooper JCW Clubman (2013-14)
Cooper S (2011-15)
Cooper S Clubman (2011-14)
* BMW OEM no. ref. : 83 30 0 496 779
[Product Details...] (product details)
|
|
| |
* Designed for loosening the flange nut on rear axle differential.
* Application: BMW E70/E90/E91/E92 with N54 B30 engine
* BMW OEM no. ref.: 83 30 0 495 552 (335 050)
[Product Details...] (product details)
|
|
| |
* This valve spring compressor allows quicker, easier service
of camshaft, valve seal, valve spring, or retainer.
* Application: 1991-2004 Ford vehicles with 4.6 L, 2V, V8;
4.6 L, 4V; 5.4 L, V8 and 6.8, V10 engine.
[Product Details...] (product details)
|
|
| |
* Specially designed to use on dry type transmission oil-seal installer/remover.
* Application: Volvo, Ford TRANSMISSION DPS6.
DPS6/6DCT250 Transmission
Fiesta (2011~2018)
Focus (2010~2018)
Focus RS (2016~2018)
* FORD OEM no. ref
[Product Details...] (product details)
|
|
| |
* Used to mark pulse wheel on removed camshaft.
* Application:. BENZ M152/M276/M278
* BENZ OEM no. ref .: 278 589 00 23
[Product Details...] (product details)
|
|
| |
Instructions:
I.This tools used for drum brakes.
II.It can fast and effective removal and installation of even the most seized wheel studs.
III.Reduces risk of damage to hubs, studs, and bearings when using tool.
IV.10 ton cylinder (combine with 10,00
[Product Details...] (product details)
|
|
| |
* Application: MDE-Diesel engines,1.6L diesel engines (RPO LH7) in the Cruze,
Equinox and Terrain.
* OPEL OEM no.ref.: EN 50885
[Product Details...] (product details)
|
|
| |
* Used to remove the high pressure diesel fuel pump sprocket on Hyundai/KIA (2001-2016)
* Application: Chain driven CRD diesel engines 1.1, 1.4, 1.5, 1.6, 1.7 fitted to Hyundai and KIA models
* HYUNDAI/KIA OEM no. ref. : 09331-2A000
[Product Details...] (product details)
|
|
| |
* Applications:
Hyundai/Kia 2.0L or 2.2L diesel R engines
Hyundai Tucson IX35 2009< , Santa Fe, Maxcruz 2009<
Kia Sportage (R) 2010<, Sorento (R) 2009<, Carnival 2010<
[Product Details...] (product details)
|
|
| |
* Applications:
Hyundai from as early as 2007 to 2018 including Accent, Elantra, i10, i20,
i30, i40, ix20, ix35, Santa fe,Tiburon, Tuscon, Veloster
Kia applications from 2007 include: Carens, Cee d, Optima, Picanto, Pro-Cee'd ,
Rio, S
[Product Details...] (product details)
|
|
| |
* Application: 2013-14 Cadillac ATS, 2014 Cadillac CTS, 2013-14 Chevrolet Malibu,
2014 Chevrolet Impala & Buick Regal 2.0L, 2.5L engines.
* OEM no.ref. : EN-50792.
[Product Details...] (product details)
|
|
| |
* Applications: Chrysler 3.6L Pentastar engine 2011 and newer
* OEM no.ref.: 10202, 10200A, & 10369A
[Product Details...] (product details)
|
|
| |
* Acura
Integra 1992-2001
Legend 1988-1995
TL 1996-2003
* Honda
Accord 1999-1997
Civic 1991-1997
Odyssey 1995-1997
Prelude 1988-1991 & 1996-1998
[Product Details...] (product details)
|
|
| |
* Application:
Land Rover V8 Defender, Land Rover Discovery 1 and 2(1990 to 2005),
Range Rover Classic and P38 (1994 to 2002) where fitted with ZF4HP22,
ZF4HP24, ZF4HP44 automatic gearboxes
An essential tool for the correct setting and align
[Product Details...] (product details)
|
|
| |
* Application:
1.2L Duratec (I3) Petrol : (303) Engine : (3) Powertrain : 2016.50 (01/2016-) : Ka+
1.5L Duratec (I3) Petrol : (303) Engine : (3) Powertrain : 2013.00 (05/2012-) : Ecosport
1.5L Duratec (I3) Petrol : (303) Engine : (3) Powertrain
[Product Details...] (product details)
|
|
| |
* Application:
1.2L Duratec (I3) Petrol : (303) Engine : (3) Powertrain : 2016.50 (01/2016-) : Ka+
1.5L Duratec (I3) Petrol : (303) Engine : (3) Powertrain : 2013.00 (05/2012-) : Ecosport
1.5L Duratec (I3) Petrol : (303) Engine : (3) Powertrain
[Product Details...] (product details)
|
|
| |
* Used for 3.5L Engine Upgrade.
* Application:
Ford Expedition equipped with 3.5L EcoBoost (272kW/370PS) model years 2018 and 2019.
Ford F-150 equipped with 3.5L EcoBoost (272kW/370PS) model years 2017, 2018, and 2019.
Ford Ford GT model
[Product Details...] (product details)
|
|
| |
* Applications: 1.6L, 2.0L, 2.3, 3.5L and 3.7 GTDI engines
Engine — 3.5L GTDI : F-150 : 2011
Fuel Charging and Controls — 3.5L GTDI : F-150 : 2011
Engine — 2.0L GTDI : Edge : 2012
Fuel Charging and Controls — 2.0L GTDI : Edge : 2012
Engine — 2.0L GTD
[Product Details...] (product details)
|
|
| |
* Special tool for setting the TDC timing, changing the timing chain or repairing the engine
* Application: Audi RS Q3 2013 to 2015, RS3 2010-2016, TT 2009-2014
* Engine codes CZGA, CZGB, CEPA, CEPB, CTSA
* VW OEM no.ref.: T40070, T03006, T03003, T4006
[Product Details...] (product details)
|
|
| |
* Designed for installation / assembly of clutch cover plate.
* Application:
VW Tiguan 2008 >, Transporter 2010 >, AUDI TT 2007>,
and suits 7-Speed dual clutch gearbox 0BH and 0BT
* Engines: VW Tiguan/Audi TT
* VW OEM no.ref.: T10459
[Product Details...] (product details)
|
|
| |
* Designed for install the inner chain check valve.
* Application: BENZ M276
* BENZ OEM no. ref.: 276589003300.
[Product Details...] (product details)
|
|
| |
* Application: BENZ Engine M112, 113, 272, 273
* Counter holder for fixing in place and unfastening
the belt pulley on the air condition compressor.
[Product Details...] (product details)
|
|
| |
* Designed for the Manual Transmission in the
MINI Cooper (non-S) with the N12 or N16 engine.
* Application:
Cooper (non-S) models:
2007-2013 R56 MINI Cooper Hardtop
2008-2014 R55 MINI Cooper Clubman
2009-2015 R57 MINI Cooper Convertibl
[Product Details...] (product details)
|
|
| |
* Application:
MINI One D 2001 to 2006, MINI Cooper S 2001 to 2006,
Cooper S JCW 2001 to 2006, MINI Convertible 2005 to
2008 with 6 speed gear box.2013-2016 R61 MINI Cooper Paceman
* Engine applications: W11 B16A petrol and
W17 D14 fitted
[Product Details...] (product details)
|
|
| |
* For holding the bearing strips in place when fitting intake camshaft
* BMW OEM Number: 118 550/551/114 463
[Product Details...] (product details)
|
|
| |
* Used when assembling PTFE crankshaft seal, flywheel end.
* Used for proper installation of rear main seal
* For vehicles with TSI engines only.
[Product Details...] (product details)
|
|
| |
* Designed to install and remove rear camshaft pulley which connect to the water pump on V6 engine.
* Applications: FORD, MAZDA 2.5L, 3.0L, V6 engine.
[Product Details...] (product details)
|
|
| |
* Designed for the removal and replacement of the high pressure fuel pump from the drive gear.
The gear will be maintained in its correctly timed position so that no adjustments to the timing are required when the pump is refitted.
* Applicati
[Product Details...] (product details)
|
|
| |
*Application:
Automatic Shifting Manual Transmission/Transaxle : Fiesta : 2011, 2012, 2013
Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6DCT250 :
Fiesta : 2010, 2011, 2012, 2013
Automatic Transmission - Vehicles With: 6-Sp
[Product Details...] (product details)
|
|
| |
* Locking Pin for PSA 2.7L diesel belt drive engines fitted in the Ford Territory.
* Not recommended for crankshaft nut removal.
* Models: Ford Territory
* Engines: 2.7 Diesel V6
* OEM: 303-1585
[Product Details...] (product details)
|
|
| |
*Used for installing the o-ring on the unit injector.
*Application: 4-cyl. Diesel engine (4 valves).
*VW OEM no. ref.: T10164
[Product Details...] (product details)
|
|
| |
*Designed for installing the crankshaft sealing ring.
*Used on diesel 3 & 4 cyl. Diesel engines with pump injector.
*VW OEM no.ref.:T10053
[Product Details...] (product details)
|
|
| |
*To turn crankshaft over in order to position to TDC.
*Application: Audi A6 2011 >, Audi A7 Sportback 2011 >, Audi A8 2010 > 8-cyl. 4.0l TFSI direct injection engine
*VW OEM No. ref.: T40272
[Product Details...] (product details)
|
|
| |
*Owing to the change of inlet camshaft adjuster (from 2016 onwards), H.C.B-B1692 is required to adjust the camshaft.
*Application:
Audi A4 2016 >, Tiguan 2016 >
4- cylinder direct injection 1.8 l, 2.0 l 4 V TFSI (Generation III)
*VW OEM no. ref.:
[Product Details...] (product details)
|
|
| |
*Used to set the crankshaft to TDC position.
*Application: Audi TT 2007 > 5-cyl. direct petrol injection engine (2.5 liter 4-valve turbo TTRS)
*VW OEM no. ref.: T03003A
[Product Details...] (product details)
|
|
| |
*For holding or turning the pulleys and sprockets on the camshaft, crankshaft, oil pump, and water pump to remove/ install fixing bolt or check engine timing.
*Application: Audi A1 2011 >, Caddy 2016 >
Engine / assembly group: 3-cyl. direct injectio
[Product Details...] (product details)
|
|
| |
*For locking the camshaft when checking and adjusting the distribution timing
*Application:Alhambra 2011 -> Altea 2005.Toledo 2005
Leon 2006 AlteaXL 2007 AlteaFreetrack 2007 Ibiza 2008 -> Altea 2009
Leon 2009 Altea XL 2009 Altea Freetrack 2009Toled
[Product Details...] (product details)
|
|
| |
*For locking crankshaft when adjusting timing.
*Application: Touareg 2003>,10-cyl. diesel engine
*VW OEM no.ref.: T10195
[Product Details...] (product details)
|
|
| |
*For removing and installing the 4/3 way central valve of the variable valve timing. Because of the new-style central valve, H.C.B- E1473 is required for the service.
*Application:
Audi A4 2016 > with 4-cylinder direct injection 1.8 L, 2.0 L 4 V TFSI
[Product Details...] (product details)
|
|
| |
*For removing and installing the 4/3 way central valve of the variable valve timing. Because of new hole-pattern of the central valve, H.C.B-F1473 is required for the service.
*Application:
Audi A4 2016 > with 4-cylinder direct injection 1.8 L, 2.0
[Product Details...] (product details)
|
|
| |
*For removing and installing the 4/3 way central valve of the variable valve timing. Because of the new-style central valve, H.C.B- G1473 is required for the service.
*Application: Audi A3 2012 > with 4-cylinder 1.8 L, 2.0 L, 4V TFSI direct injection en
[Product Details...] (product details)
|
|
| |
Developed specifically for the plastic sump plugs found on the latest VAG range.
Sump Plug OEM no. ref.: 06L-103-801
This plug is also used in the cam cover for the latest 1.6 and 2.0 twin cam diesel engines found in the VAG range.
Drain plug should be
[Product Details...] (product details)
|
|
| |
*To guide the mechatronic component during the mounting of the
mechatronic unit.
*Application:
Golf 2004 >, Golf 2009 >, Golf Plus 2005 >, Touran 2004 >,
Audi A3 2004 >, Eos 2006 >, Passat 2006 >, Passat CC 2009 >,
Scirocco 2009 >
7-speed
[Product Details...] (product details)
|
|
| |
*This tool allows quick and precise on car replacement of the lower trailing arm bush.
*Application: VW (TOUAREG 2. 5), AUDI (Q7), PORSCHE (CAYENNE)
[Product Details...] (product details)
|
|
| |
*For separating brake servo push rod from brake pedal.
*Application: VW Passat (2015-2016) /VW Phaeton
*VW OEM no.ref.: T10159
[Product Details...] (product details)
|
|
| |
*Counterholding the vibration damper.
*Application:Type/Model: Audi A6 2011 >, Audi A7 Sportback 2011 >
Engine/Assembly group: 6-cyl. TDI common rail (3.0l, 4V engine generation II EVO)
*VW OEM no.ref.: T40298
[Product Details...] (product details)
|
|
| |
*Used to position camshaft during reassembly to insure correct timing position.
*Application: AUDI - V8 2/89-4/96 ABH, PT
*VW OEM No. ref.: 3199
[Product Details...] (product details)
|
|
| |
*Used to rotate the camshaft for adjusting engine timing or tightening the timing chain.
*Application: Audi A6 2011 >, Audi A7 Sportback 2011 >, Audi A8 2010 > 8-cyl. 4.0l TFSI direct injection engine
*VWOEM No. ref.: T40272/ T40269/ T40264/ T40071
[Product Details...] (product details)
|
|
| |
*To secure chain tensioner
*Application: Audi A7 2011, Audi Q7 2007 >6-cyl. TDI common rail 3.0l 4V engine
*VW OEM No. ref.: T40246
[Product Details...] (product details)
|
|
| |
*Releasing connector on sensor module
*Application:
Type / model: Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi Q5 2008 >,
Audi A5 Coupe 2008 >, Audi A5 Sportback 2008 >,
Audi A7 Sportback 2011 >
Assembly group: Maintenance 7-s
[Product Details...] (product details)
|
|
| |
*Used when loosening side shaft and releasing connector on sensor module on gearbox 0B2.
*Application:
Type / model: Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi Q5 2008 >, Audi A5 Coupe 2008 >, Audi A5 Sportback 2008 >, Audi A7 Sportback 2011 > wit
[Product Details...] (product details)
|
|
| |
*For Separating splitting track-rod ends, ball joints on anti-roll bar…etc., especially in confined space conditions like on Audi A4, A6, A8, VW Passat ab '97, etc
*28 mm ball joint separator for universal purpose.
[Product Details...] (product details)
|
|
|
|
